Lenovo 6532 User Manual

Page 42

Advertising
background image

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• See Chapter 7 “Parts listing, RS210 Types 6531, 6532, 6533, and 6534” on page 175 to determine which

components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

• If an action step is preceded by “(Trained service technician only),” that step must be performed only by

a trained service technician.

Sensor Sys Board Fault has
transitioned to critical from a less
severe state.

Error

A sensor has changed to
Critical state from a less
severe state.

1. Check the system-event log.

2. Check for an error LED on the

system board.

3. Replace any failing device.

4. Check for a server firmware

update.

Important: Some cluster
solutions require specific code
levels or coordinated code
updates. If the device is part
of a cluster solution, verify
that the latest level of code
is supported for the cluster
solution before you update the
code.

5. (Trained service technician

only) Replace the system
board.

Sensor RAID Error has transitioned to
critical from a less severe state.

Error

A sensor has changed to
Critical state from a less
severe state.

1. Check the hard disk drive

LEDs.

2. Reseat the hard disk drive for

which the status LED is lit.

3. Replace the defective hard

disk drive.

The Drive n Status has been removed
from unit Drive 0 Status.(n = hard disk
drive number)

Error

A drive has been removed.

Reseat hard disk drive n.(n = hard
disk drive number)

The Drive n Status has been disabled
due to a detected fault.(n = hard disk
drive number)

Error

A drive has been disabled
because of a fault.

1. Run the hard disk drive

diagnostic test on drive n.

2. Reseat the following

components:

a. Hard disk drive

b. Cable from the system

board to the backplane

3. Replace the following

components one at a time, in
the order shown, restarting the
server each time:

a. Hard disk drive

b. Cable from the system

board to the backplane

c. Hard disk drive backplane

(n = hard disk drive number)

34

Hardware Maintenance Manual

Advertising
This manual is related to the following products: