Lenovo 6532 - Manual (Page 40)

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 7 “Parts listing, RS210 Types 6531, 6532, 6533, and 6534” on page 175 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units (FRU).
• If an action step is preceded by “(Trained service technician only),” that step must be performed only by
a trained service technician.
The System %1 encountered
a POST Error.(%1 =
CIM_ComputerSystem.ElementName) Error A POST error has
occurred.(Sensor = Firmware
Error) 1. Update the server firmware on
the primary page.
Important: Some cluster
solutions require specific code
levels or coordinated code
updates. If the device is part
of a cluster solution, verify
that the latest level of code
is supported for the cluster
solution before you update the
code.
2. (Trained service technician
only) Replace the system
board.
A Uncorrectable Bus Error has
occurred on system %1.(%1 =
CIM_ComputerSystem.ElementName) Error A bus uncorrectable error
has occurred.(Sensor =
Critical Int PCI) 1. Check the system-event log.
2. Check the PCI error LEDs.
3. Remove the adapter from the
indicated PCI slot.
4. Check for a server firmware
update.
Important: Some cluster
solutions require specific code
levels or coordinated code
updates. If the device is part
of a cluster solution, verify
that the latest level of code
is supported for the cluster
solution before you update the
code.
5. (Trained service technician
only) Replace the system
board.
32 Hardware Maintenance Manual