Lenovo 6532 - Manual (Page 217)

• Initiates an unattended installation of the operating system and device drivers
Setup and configuration
When you start the EasyStartup DVD, you will be prompted for the following:
• Select the language in which you want to view the program.
• Select the language of the keyboard you will be using with the program.
Note: The following language keyboards are supported: English, Dutch, French, German, Italian, Japanese,
Spanish, and Turkish.
You will then see one or more reminders about configuring storage devices, and then you will be presented
with the Lenovo License Agreement. Read the license agreement carefully. You must agree with terms in
order to continue.
After agreeing to the license agreement, you will be given the following choices:
• Continue to the main program interface
• Use a shortcut to install an operating system based on a response file that you previously created using
the EasyStartup program
• Use a short cut to configure RAID controllers based on a RAID response file that you previously created
using the EasyStartup program
If you continue to the main program interface, you will have the following selectable options:
• Compatibility notes: This selection provides information about the RAID controllers, operating systems,
and server configurations supported by that version of the EasyStartup program.
• User Guide: This selection provides information about the features provided by that version of the
EasyStartup program.
• Hardware list: This selection displays a list of hardware devices detected by the EasyStartup program.
• Configure RAID: This selection enables you to view the current RAID configuration for each installed
RAID controller and make changes if needed.
• Install operating system: This selection displays a series of choices and prompts to collect information
required for installation, prepares the hard disk for installation, and then initiates the installation process
using the user-provided operating-system installation CD or DVD.
• About: This selection displays version information and legal notices.
Configuring RAID
The RAID configuration feature that is part of the EasyStartup program enables you to view and change RAID
settings for supported RAID controllers. Through this feature, you have the ability to configure each installed
controller. The program automatically detects the number of discs currently attached to the controller,
determines the possible RAID configurations that can be configured, and prompts you through the steps to
configure one or more disc arrays with or without hot-spare drives. As you configure each controller you will
be given the option to save the RAID configuration settings to a RAID response file, which you can use on
other similarly configured Lenovo servers. This method satisfies most users' needs.
Note: The EasyStartup program provides limited support for the IBM ServeRAID-BR10il SAS/SATA
Controller. You must use the LSI Configuration Utility to configure the disc array for this controller. However,
after the disc arrays are configured, you can use the EasyStartup program to install the operating system and
associated device driver. See “Using LSI Configuration Utility program” on page 204 for details.
Chapter 8 . Configuring the server 209