NEC UNIVERGE NEAX 2000 IPS - Manual (Page 144)

Chapter 8 System administration
Page 8- 6 UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
Issue 6
MP Program Download
The U
NIVERGE NEAX 2000 IPS provides Online MP Program Download via IP network using
the CP24C and CP31C. This feature allows an MP upgrade program to be downloaded to the
U NIVERGE NEAX 2000 IPS MP card with the PBX on-line and during the download process all
features and functions are available. The MP Program Download feature is available to a stand
alone system or a Remote system in a Remote PIM network.
The IPS downloads the MP upgrade program from FTP server using MATWorX. MATWorX
and the FTP server can be installed and running on the same PC
. A single FTP server or
multiple FTP servers can be used. Immediate or scheduled changeover to the upgrade
program is available. It is also possible to change back to the previous program that was in use
before the changeover (changeback).
MP Download Process
Service Conditions
General Service Conditions
The MP program download can be executed to the PN-CP24-C/PN-CP31-C (MP card) when a
PZ-M606-A is mounted.
For the Retrofit system and Backup CPU system remote download of MP program is not
available.
The call processing is stopped while the system is initialized by the program changeover
execution.
Remote download of AP program is not available.
While the PBX is off-line, you cannot execute the program downloading, or program
changeover/ changeback/ program version matching (immediate). However, it is possible to
read various information and set the schedule (date/time) for program changeover/ changeback/
program version matching even while the PBX is off-line.
When the PN-32IPLA is mounted in the system, the MP program download (FTP) is not
available. When the PN-32IPLA-A or PN-8IPLA is mounted, it is available in the system.