NEC UNIVERGE NEAX 2000 IPS - Manual (Page 98)

Chapter 5 Station Equipment
Page 5- 12 UNIVERGE NEAX 2000 IPS Request For Proposal (RFP) Reference Guide
Issue 6
Dterm Series E Accessories & Adapters (Cont)
ACA-U AC Adapter Unit (ACA-U)
The AC adapter provides the Dterm Series E terminal with the voltage required
to power the built-in long loop adapter, and APR units. One AC adapter can
power up to three optional adapters.
WMU-U External Wall Mount Unit (WMU-U)
The External Wall mount Unit is ONLY required if an option adapter is required
on the Multiline terminal which is being mounted on a wall. It permits the
terminal to be installed to a flat wall surface. With this unit, any option adapter
may be installed to the terminal for high functionality. The built-in wall mount
unit should be used for wall mount operation when no option adapter (except
ADA-U unit) is installed on the Multiline terminal.
Note: This unit is designed to enhance the hands free operation of Multiline
Terminal by providing an echo canceling circuit. However, this unit is primarily
designed for a typical small office environment and not for conference rooms.
Its performance should not be compared to commercial, expensive audio
conference units. The HFU-U requires an AC adapter.
WMU-W
Wall Mount Unit for DTP-2DT-1 terminal
PC Telephony
Adapter PC Telephony Adapter
The PC Telephony Adapter provides an integration link from a desktop PC to
the Dterm Series E telephone. Using Microsoft
® Windows™ Telephony API,
Windows applications users can now control or use many of the features,
desktop message notification, calling line identification, and calling functions of
the Dterm Series E telephone from their PC.
IPW-2U (ELC) IP Adapter for Dterm Series E. For use with 32 Button Display Terminal and
PN-32IPLA ELC station card only. Requires either ACA-U local power or
SN1604 Power Hub 12-Port
IPW-2U (P-P) The IPW-2U (P-P) adapter is a full duplex switch, which can be installed on
any of the NEC LCD Dterm Series E phones when using Peer-to-Peer IP
stations.
Requires either ACA-U local power or SN1604 Power Hub 12-Port