NEC UNIVERGE NEAX 2000 IPS - Manual (Page 93)

Chapter 5 Station Equipment
UNIVERGE NEAX 2000 IPS Request For Proposal (RFP) Reference Guide Page 5-7
Issue 6
Terminal Options
Item Description
WM-R Unit
Series i Multi-line Terminals with an AP (R)-R, AP (A)-R, CT (A)-R, and/or an IP-
R Unit can be wall mounted using the WM-R Unit.
AD(A)-R Unit
Provides Series i Multi-line Terminals ability to interface with recording device.
AP( R)-R Unit
Provides Series i Multi-line Terminals ability to interface with analog device such
as a cordless telephone, facsimile machine, external speakerphone, Automatic
Dialer or modem. Provides ringing to analog device connected. Requires an AC-
R ADP.
AP(A)-R Unit
Provides Series i Multi-line Terminals ability to interface with analog device such
as a cordless telephone, facsimile machine, external speakerphone, Automatic
Dialer or modem. No ringing is provided.
CT(A)-R Unit
Connects a Series i Multi-line Terminal to a PC providing a complete turnkey
package with graphical telephone user interface and call logging. Shipped with
Multi-line Phone Kits software. Supports Serial interface.
IP-R Unit
A compact plug-and-play device that installs into the base of a Dterm Series i
display terminal. Integrated two-port 10/100baseT Ethernet Pass through hub
that permits using one port to connect the network interface card (NIC) from the
PC to the IP network. The other is plugged directly into a LAN or an IP network
device such as a router, DSL modem or cable modem. Requires an AC-R ADP.
AC-R Unit AC adapter for DSS/BLF Console, AP(A), AP(R), or IP-R Unit
Line Conditions
Cable Length Note 1 Standard with AC Adapter
8DLC 300m (984ft) Note 2
4DLC 300m (984ft) 1200m (3937ft)Note 4
Dterm 4D
Dterm 8 / 8D
Dterm 16/16D/16LD
2DLC 850m (2789ft) 1200m (3937ft)Note 4
8DLC 200m (656ft) Note 2
4DLC 200m (656ft) 1200m (3937ft)
Dterm 32/32D
2DLC 850m (2789ft) 1200m (3937ft)
8DLC - 300m (984ft)
4DLC - 1200m (3937ft)
Dterm Series i
DSS/BLF Console
Note 3
2DLC - 1200m (3937ft)
Note 1 : Cable length is based on the following conditions.
Diameter of the cable is 0.5 mm.
The Protection arrester is not inserted between the terminal and PBX
.
Note 2: When using 8DLC card, long line function is not availability, even if it is equipped with AC Adapter.
Note 3: The DSS/BLF Console requires local AC/DC supply .
Note 4 : The DTR 4D-1 does not support an AC adapter.