NEC UNIVERGE NEAX 2000 IPS - Manual (Page 277)

Chapter 13 Voice Over IP (VoIP)
UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide Page 13- 35
Issue 6
For Voice Control/Voice Packet
Port Type Destination Default Port No. Remarks
Dterm IP 3462
1024-65534
Assign by Round Robin method
(Use From the lowest in blank port)
IP PAD 9998-10317
Base Port: 1024-65534
Assign by CM0A Y=10-17/
30-37/100-115>93
IPT (CCIS) 56000-56062 Base Port: Fixed to 56000
Port for Voice
Packet (RTP)
IPT (H.323) 56000-56047
Base Port: 20000-65000
Assign by CMBA Y=34
(Default: 56000)
For CCIS Virtual IPT
Port Type Destination Default Port No. Remarks
Port for Server
PBX (TCP)
Server PBX 57000
1024-65534
Assign by CM0B Y=20>00
Port for Client
PBX (UDP)
Client PBX 58000-59023
Base Port: 1024-65534
Assign by CM0B Y=20>01
Select by Round Robin method
(Use from lowest in blank port)
For H.323 IP Trunk
Port Type Destination Default Port No. Remarks
H.255.0 RAS
Port (UDP)
IPT 1719 Fixed to 1719
H.255.0 Control
Port (UDP)
IPT 1720 Fixed to 1720
For Voice Control/Voice Packet
Port Type Destination Default Port No. Remarks
2000 IPS
(Main Site)
3300
1024-65534
Assign by CM0B Y=10>70
DHM Self Port (Communication port
between the Main Site and Remote
Site), Common Port
2000 IPS
(Main Site)
3300 + Remote Site
No.
Port per Remote Site (MP-MP)
Port per Remote Site:
Setting data of CM0B Y=10>70 + Site
No.
Port for
Remote PIM
Control (UDP)
2000 IPS
(Main Site)
50000 + FP/AP No.
of Remote Site x 64
1024-65534
Assign by CM0B Y=10>00-59
(Virtual FP No. of Remote Site)
Port per Remote Site (MP-FP)