NEC UNIVERGE NEAX 2000 IPS - Manual (Page 352)

Chapter 17 Hotel/Motel System
Page 17-12 UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
Issue 6
Room Status
This feature provides the Hotel/Motel (H/M) Front Desk Instrument with a visual display of the guest’s
room status. A supplementary print out (individual and summary) can be provided.
Items indicated are as follows:
Set status of Do Not Disturb
Set status of Message Waiting
Set status of Room Cutoff
Automatic Wake Up Time if set
Check In/Check Out status
Maid Status
The status of the function is indicated by a green LED associated with each function key:
Check In/Check Out set
Do Not Disturb set
Message Waiting set
Room Cutoff set
Automatic Wake Up set (LCD displays time set)
The Room Status of stations can be printed at the Hotel/Motel printer (if available) by pressing the print
(PR) key on the Hotel/Motel Front Desk Instrument prior to pressing the STS key.
Single Digit Dialing
This feature provides the station user the ability to dial single digit codes to access certain features
while still allowing the same digit dialed to be used as the first digit of guest room station numbers.
This feature is available on a numbering plan basis. Up to four different numbering plans are available
per system. For multiple tenant applications, each tenant can be assigned to one of these four
numbering plans.
When this feature is assigned, digits in the numbering plan can overlap and Single Digit Dialing is
based on a time-out after dialing the first digit. The timing duration before the system stops looking for a
second digit is programmable from two-eight seconds. The default setting is four-five seconds.
Digits 0-9, *, and # can be assigned within each numbering plan for Single Digit Dialing.
The following features can be activated using Single Digit Dialing:
Trunk Answer Any Station
Trunk Access
Single Digit Station Numbering
Operator Calls (Dial 0)