NEC UNIVERGE NEAX 2000 IPS - Manual (Page 182)

Chapter 9 Feature Descriptions
Page 9- 36 UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
Issue 6
Call Forwarding - Intercept - CCIS
This feature allows calls to an inoperative
number, through a CCIS trunk, to be
intercepted and automatically routed to a
recorded announcement informing the caller
that an inoperative number was dialed and
giving the Listed Directory Number for
information.
Call Forwarding - Override - CCIS
This feature allows a target station user
(Station A) to call a station (Station B) that has
set Call Forwarding - All Calls - CCIS.
Call Processing Indication - CCIS
This feature provides visual indications of all
CCIS calls being processed or waiting
processing at the Attendant Console.
Call Transfer - All Calls - CCIS
This feature allows a station user to transfer
incoming or outgoing Central Office, intra-
office and inter-office calls to another station
in the CCIS network, without Attendant
assistance.
Call Transfer - Attendant - CCIS
This feature permits a station user, while
connected to a CCIS network call, to transfer
a call to an Attendant Console via the CCIS
network.
Called Station Status Display - CCIS
This service feature provides, on the LCD
display of the calling Multiline Terminal, a
display of the called station status of the
remote office within the CCIS network.
Calling Name Display - CCIS
This feature permits the station name of a
calling or called party at another switching
office, through the CCIS network, to be
displayed either on a Multiline Terminal or an
Attendant Console.
Calling Number Display - CCIS
This feature permits the number of a calling or
called party at another switching office to be
displayed either on a Multiline Terminal or an
Attendant Console.
CCIS Networking via IP
This feature provides CCIS networks with
Voice over IP (VoIP) capabilities to provide a
converged infrastructure over corporate Wide
Area Networks (WAN). The IP Enabled Dterm
can communicate with other IP Enabled
Dterm over the CCIS network (IP based) on a
peer-to-peer connection basis. The legacy
terminals (TDM based terminals) can
communicate with other legacy terminals or IP
Enabled Dterm terminals over the CCIS
network, via IP Packet Assembler/
Disassembler (IP-PAD). Voice compression of
G.729a (8 kbps) and G.723.1 (5.3 kbps /
6.3 kbps) is available for
those connections.
The CCIS Networking via IP provides users
with all TDM-based CCIS functionality, such
as feature transparency, centralized
management, and centralized facilities.
Centralized Billing - CCIS
This feature is used to collect billing
information from each office within the
network and to direct it to the associated
center office. Billing information is then
forwarded to the central billing centers via
RS232C interfaces.
Centralized Day/Night Mode Change - CCIS
This feature switches the Day/Night mode of a
remote office, linked to the main office (2400
IPX) via CCIS. The mode is switched in
accordance with the Day/Night mode
switching on the Attendant Console at the
main office.