UTStarcom PN-820 - Manual (Page 191)

189
C
H
8
ACTIVESYNC
SET UP AN EXCHANGE SERVER CONNECTION
To complete this configuration, you will need to get the name of the
server and the server domain name from your service provider or
system administrator. You must also know your Exchange user name
and password.
Before changing synchronization settings on the phone,
disconnect it from your PC.
1 In the phone Home screen, press left soft key <
[Start], select ActiveSync and press O [OK].
2 Press [Menu] select Configure Server and
press O [OK]. If you have not yet set up sync
with Exchange Server, this will say Add Server
Source.
3 In Server address, enter the name of the server
running Exchange Server, and press left soft key
< [Next].
4 Enter your user name, password, and domain
name, and press Next.
5 If you want the phone to save your password
so that you will not need to enter it again when
connecting, select the Save password check box
and press O [OK].