UTStarcom PN-820 - Manual (Page 198)

196
C
H
8
ACTIVESYNC
CHANGE E-MAIL SECURITY OPTIONS
ActiveSync lets you set up S/MIME e-mail encryption and signing. You
will have to obtain a valid certificate for signing or encrypting e-mail
before you will be able to sign or encrypt e-mail successfully.
1 In the phone Home screen, press [Start], select
ActiveSync and press O [OK].
2 Press the right soft key > [Menu] select
[Options] and press O [OK].
3 Scroll to E-mail and press the right soft key >
Settings.
4 Press [Menu] select Advanced and press O [OK].
5 Do one or both of the following:
6 To sign all outgoing messages so that a recipient
can be certain that the message as received was
sent by the claimed sender, and has not been
altered in any way, check Sign messages.
7 To encrypt all outgoing e-mail to protect the
contents of the message from being viewed by
anyone other than the intended recipient, check
Encrypt messages.
ACTIVESYNC
CONNECT TO A PC USING BLUETOOTH
Follow the instructions in ActiveSync Help on the PC for configuring
Bluetooth on your PC to support ActiveSync.
1 In the phone Home screen, press [Start], select
ActiveSync and press O [OK].
2 Press [Menu] Connect via Bluetooth. Ensure that
the phone and PC are within close range.
3 If this is the first time you have connected to
this PC via Bluetooth, you must complete the
Bluetooth wizard on the phone and set up
a Bluetooth partnership with the PC before
synchronizing.
4 Press Sync.
5 When finished, press [Menu] and select
Disconnect Bluetooth.
6 To preserve battery power, turn off Bluetooth.