UTStarcom PN-820 - Manual (Page 32)

30
C
H
2
TIP
LOCK THE KEYPAD
Locking the keypad turns off keypad functionality. This is a helpful
feature if, for example, the phone is turned on and in your pocket, and
you want to prevent accidental key presses.
1 Display the Quick List by pressing the lower
button Q [Q/REC] on the right side of your phone.
2 Select Key lock and press O [OK].
3 Once the keypad is locked, the left soft key label
changes to Unlock.
You can still receive calls and make emergency calls when the
keypad is locked.
Press the RECORD key on the right side of the phone briefly to
display the Quick List and press Key lock.
UNLOCK THE KEYPAD
In the Home screen, press Unlock and press the * key.
BASIC FUNCTIONS
INSERT A THREE-SECOND PAUSE IN A DIALING SEQUENCE
There may be occasions when you wish to pause dialing after you’ve
selected a contact to call. You can insert a three second pause between
selecting a contact to call and when the phone actually dials.
1 In the Home screen, press the right function key
> [Contacts].
2 Press the contact in whose phone number you
want to insert a pause.
3 Select the phone number and Press [Menu]
[Edit].
4 Place the cursor where you want to insert the
pause.
5 Press [Menu] Insert Pause.
The letter p appears where the three-second pause will occur in the
dialing sequence. Press [Done].
BASIC FUNCTIONS