UTStarcom PN-820 - Manual (Page 26)

24
C
H
2
TIP
USING THE QUICK LIST
The Quick List provides a list of commands that you can use to quickly
perform common actions.
1 Press the lower button Q [Q/REC] on the right
side of your phone.
2 Use the Navigation Key to select the Quick List
command you want.
To Select this command
Turn off the phone. Power off
Turn on or off any wireless
connection, such as a Bluetooth,
Cellular phone. (You will not be
able to make or receive phone
calls.)
Wireless Manager
Lock the keypad so that you cannot
make accidental key presses. To
unlock the keypad, press Unlock,
and then press the * key.
Key lock
Enable the phone lock. Device lock
Make one of these profiles the
active profile.
Normal
Silent
Meeting
Outdoor
Automatic
Headset
Car
Speakerphone
You can turn off wireless connections to preserve battery
life when you don’t want to make or receive calls, or in
environments where cell phones must be turned off. When
wireless connections are off you can still use other phone
features.
TURNING THE PHONE ON
Press and hold the END key E until your “Power On” logo appears.
• If “Password” appears on the display enter your 4-digit password to
unlock your phone.
• If the battery does not have enough charge to turn on the phone, the
keypad will not light up. You should charge your phone before turning
it on.
TURNING THE PHONE OFF
Press and hold the END key E until the “Power Off” logo appears.
• Immediately change or recharge the battery when “LOW BATTERY!!
PHONE IS TURNING OFF!” appears on the display. The phone’s
memory may possibly be damaged if the phone turns off due to the
battery completely draining.
If the phone turns off, unsaved data may be lost.
TURNING THE PHONE ON/OFF