Bluetooth, Activesync troubleshooting, Accept a bluetooth partnership – UTStarcom PN-820 User Manual
One remote networking option that is available to you with the
PN-820 is Bluetooth wireless. By activating Bluetooth you can
exchange information easily with other devices.
ACCEPT A BLUETOOTH PARTNERSHIP
A Bluetooth partnership is a direct link to other devices. Both devices
that wish to connect must establish or accept a “partnership” through
1 Ensure that Bluetooth is turned on and that your
phone is discoverable.
2 When prompted to accept a Bluetooth
partnership with the other device, press Yes.
3 In PIN, enter a personal identification number
(PIN) between 1 and 16 characters, and press
[Done]. You must enter the same PIN that was
entered on the device requesting the Bluetooth
4 The Bluetooth partnership is created. You can
now exchange information with the other device.
Turn Bluetooth on and off
Make your device discoverable
could not be
completed. If this
condition persists, try
deleting and then re-
creating the device’s
Problem could be caused
by a specific folder or
item on the device. The
problem will persist unless
you delete the item or
items, which can be
difficult to identify. Usually
a new sync relationship
will sync successfully.