UTStarcom PN-820 - Manual (Page 78)

76
C
H
4
SELECT NAM
The NAM or Number Assignment Module, is a part of the phone that
stores a wireless device’s phone number, lock code, timer reset code
and other user information. The NAM is programmed by the service
provider when a device is activated. The NAM also associates the
Mobile Identification Number (MIN) with the Electronic Serial Number
(ESN).
1 From the Home screen, press the left soft key <
[Start].
2 Select Settings and press O [OK].
3 Scroll to Connections and press O [OK].
4 Select Wireless Manager and click O [OK].
5 Scroll to Phone and press the right soft key >
[Menu].
6 Select Phone Settings and press O [OK].
7 Select NAM Selection and press O [OK].
8 Use the left and right Navigation Keys to select
NAM 1 or NAM 2.
9 Press [Done].
SETTINGS
TURN ERI BANNER ON / OFF
If you do not desire to see the ERI notification, you have the option of
toggling the banner displaying the ERI messages on and off.
1 From the Home screen, press the left soft key <
[Start].
2 Select Settings and press O [OK].
3 Select Call Options and press O [OK].
4 Check or clear ERI Banner and press [Done].
REMOVE A PROGRAM
You can remove programs that have been added to the phone at any
time. Be sure that you select the right program before removing it.
1 From the Home screen, press the left soft key <
[Start].
2 Select Settings and press O [OK].
3 Scroll to Remove Programs.
4 Select the program to remove.
5 Press the right soft key > [Menu].
6 Select Remove.
Programs that come pre-installed in the phone cannot be
deleted.
SETTINGS