UTStarcom PN-820 - Manual (Page 240)

238
C
H
9
A short melody will play and a microphone icon will appear at
the top of your screen.
3 In a clear voice say, “Help”.
4 After Voice Command finishes speaking, answer
“General”.
You may also press the Voice Command Button anytime during
a question to interrupt. Once the microphone icon is visible you
may say your answer.
TRY OUT MORE COMMANDS
• “What’s my next appointment?”
• “What is my battery level?”
• “What time is it?”
• “Start Solitaire”
TO LEARN MORE
• Read the feature topics in this document.
• You can also use the “Help” command at any time.
• To return to this help file, press Start ➞ (More...) ➞ Voice
Command Setup ➞ Menu ➞ Help.
VOICE COMMAND
Follow these three easy steps:
1 - Adjust the Microphone
2 - Set the Voice Command Button
3 - Try out Voice Command
1 - ADJUST THE MICROPHONE
To get better speech recognition:
1 If there is a microphone setting available, turn off
Automatic Gain Control and set the microphone
gain level to a medium level.
After completing this task, press Done and Back as needed to return
to help.
2 - SET THE VOICE COMMAND BUTTON
The Voice Command Button is used to activate voice recognition.
To set the Voice Command Button:
1 Press Start ➞ (More ...) ➞ Voice Command
Setup.
2 In Voice Button, select the button you want to
assign and press Done to accept.
3 - TRY OUT VOICE COMMAND
Let’s try the “Help” command to learn how to answer a question. If you
have any problems read Troubleshooting:
1 Hold your device about 2" away.
2 Press and release the Voice Command Button.