Arser and, Xecution errors, Parser and execution errors – Xantrex Technology XMP 2600 User Manual
Page 114
Error codes
Power module setup
Parser and Execution errors
37
Communications Driver error (false End Of Command).
39
The Parser lost synchronization with the Input Stream (processing a non-
existing command).
64
a miss-placed CR in the Input Stream.
65
Command or Query Mnemonics are too long (more than 6 characters).
66
Illegal Command or Query (first character).
67
Illegal Command or Query.
68
Missing parameter (value).
69
Non-digit character in Numeric Parameter.
70
Parameter value overflow.
71
Parameter value is less than zero (negative).
72
Not a valid Channel Number (should be in the range 1 to 16).
73
Parameter value is out of its allowed range.
74
Can not display the string.
75
The referenced Channel has no operative Power Module installed.
76
The referenced Storage Area is empty - no data to recall.
77
Protection settings cannot be programmed (Auto Protection Mode is on).
79
Can not turn Global On while a Channel Shut is in effect.
80
No Polarity Relays installed for the referenced Power Module.
81
No Disconnect Relay installed for the referenced Power Module.
82
The XMP 2600 is not in 488.2 Mode.
83
The XMP 2600 is in 488.2 Mode.
84
Can not clear the Sequence Program while it is running.
XMP 2600 User’s Guide
rev. 1.0
95