Xantrex Technology XMP 2600 - Manual (Page 96)

Power Supply setup Running the sequence program
9
Power Supply
setup
In the setup mode of operation you control system and communication links
parameters. Some power module parameters are set using this mode of operation
along with comprehensive power module testing and manual power module
calibration functions.
Using the setup mode of operation you are able to view system’s controller and
power module’s controller information, not available in the normal status views.
What is displayed
The following illustration shows the main display of the setup mode of operation.
condensed
modules status
system
parameters to set
system
symbol
Main display of system setup
How to get there
To enter the setup mode of operation proceed as follows:
XMP 2600 User’s Guide rev. 1.0 77
Make sure the display is in status mode.
Move the cursor to the system symbol (“Σ”) using the LEFT / RIGHT
selection keys or the SYSTEM key.
Press the SET key.
Display details
The upper row of the display indicates the operating mode in effect (setup).