Xantrex Technology XMP 2600 - Manual (Page 9)

About this manual
This User’s Guide contains information on operating the XMP 2600.
Who should
use this
manual
This manual is designed for users who understand basic electrical theory, especially
as applied to the operation of power supplies. This implies a recognition of constant
voltage and constant current operating modes and the control of input and output
power, as well as the observance of safe techniques while making connections to the
supply and any changes in settings.
Chapters
Chapter 1: General Information gives basic information on using and operating
the XMP power supply.
Chapter 2: Installation describes the proper way to install the XMP. It also
describes the XMP’s connections to external devices and the load and details the
way to install / replace a power module.
Chapter 3: Turn-On Checkout describes the way to configure and test the XMP
2600 power supply system and its power modules.
Chapter 4: Using the Front Panel describes the front panel with its display, keys
and indicators. It provides detailed description on how to operate the XMP 2600
using its front panel with an emphasis on viewing status information.
Chapter 5: First Operation Steps guides you through the first steps of manually
programming the XMP 2600 power supply system.
Chapter 6: Basic Operation provides basic operating instructions when manually
programming the XMP 2600 power supply system.
Chapter 7: Advanced Features covers advanced features offered by the XMP
2600 power system and explains the way to utilize them while operating the power
supply from its front panel.
Chapter 8: Sequence Programming describes the way to utilize Sequence
programming which is a feature of the XMP 2600 that enables it to automatically
change states and create dynamic outputs without the use of a remote controller.
Chapter 9: Power Supply Setup describes how to control system and
communication links parameters, some power module parameters, view system’s
controller and power module’s controller information, and other setup issues.
Appendix A: System Messages contains a list of all the messages that may be
displayed by the XMP’s main controller during operation.
Appendix B: Error Codes describes the XMP’s main controller and power
modules generated error codes that may be displayed during operation.
Appendix C: Test Results describes the way power module test results can be
interpreted.
Appendix D: Calibration discuses calibration issues.
h XMP 2600 User’s Guide rev. 1.0