Xantrex Technology XMP 2600 - Manual (Page 76)

Advanced features Work point window warning
7
Advanced
features
This chapter covers advanced features offered by the XMP 2600 power system and
explains the way to utilize them while operating the power supply from its front
panel.
Some advanced features are only available when a remote controller
is controlling the power supply.
Work point window warning
In some applications it is desirable to know when a connected load requirements for
power exceed a pre-defined V-I range.
To facilitate in notifying the user of such occurrences, the XMP 2600 power supply
system offers the work point window warning feature.
The work point window warning feature allows the user of
the XMP 2600 power supply system to define high and
low voltage and current thresholds (above and below the
output settings).
Vmax
Imax Imin
Vhigh
range
Vlow
Ilow Ihigh
range
Iset
V
Vset
When the operating conditions of the connected load
exceed any of the enabled window thresholds – a warning
event is generated.
I
When a warning event is generated, the condensed status symbol of the power
module starts blinking, as does the alarm indicator. The blinking of the status
symbol continues until either the user selects the power module in status mode or the
condition that caused the warning is removed.
Involved
parameters
The work point window feature is set-up using two parameters:
HIGH work point window thresholds (Vhigh and Ihigh) and enable.
LOW work point window thresholds (Vlow and Ilow) and enable.
HIGH and LOW work window thresholds can be enabled
independently of each other.
57 XMP 2600 User’s Guide rev. 1.0