Xantrex Technology XMP 2600 - Manual (Page 8)

WARNING
Do not operate the unit with a missing module. Modules must be arranged
consecutively from left to right. Unused module locations must be closed with
ventilation obstructions. Operating the unit with missing modules or missing
internal ventilation obstructions may cause overheating and fire hazard.
Power Supply
Safety WARNING — High Energy and High Voltage
Exercise caution when using and calibrating a power supply. High energy levels can
be stored at the output voltage terminals on a power supply in normal operation. In
addition, potentially lethal voltages exist in the power circuit and on the output and
sense connectors of a power supply with a rated output greater than 40 V. Filter
capacitors store potentially dangerous energy for some time after power is removed.
CAUTION
Operate the power supply in an environment free of flammable gases or fumes. To
ensure that the power supply’s safety features are not compromised, use the power
supply as specified in this manual and do not substitute parts or make any
unauthorized modifications. Contact the service technician for service and repair
help. Repairs must be made by experienced service technicians only
Regulatory Approvals and Safety Agency
Compliance
Regulatory
Approvals
European Standards: Electromagnetic Emissions and Immunity -meets Council
Directive 89/336/EEC
Electromagnetic Emissions: EN61326:1997 +A1:1998
EN61000-3-2:2000
EN61000-3-3:1995
Electromagnetic Immunity: EC61326:1997 +A1:1998
Safety
Agency
Compliance
European
Standards:
Safety Meets EN61010 –1
American Standards:
Electromagnetic Emissions Meets FCC Class A
Safety Meets UL61010-1
XMP 2600 User’s Guide rev. 1.0 g