Xantrex Technology XMP 2600 - Manual (Page 21)

Cleaning General Information
Option 0:......................... Full front panel with keyboard, display, line
switch and line indicator.
Option 2:......................... Slave expansion mainframe, which can be
connected only to a second unit, option 0. Blank
front panel, which has only line switch and line
indicator.
The power modules installed are according to the user's order. Up to eight (1/8
width) power modules can be installed.
Power module's internal output relays are standard and may, optionally, be omitted
at the user’s request. They enable output disconnection and polarity reversal.
Cleaning
The instrument may be cleaned using a dry soft cloth.
WARNING
No liquid of any kind may be used for cleaning the instrument.
Accessories
The unit comes with the following standard accessories:
1) One CD-ROM with:
User’s Guide
Programming Manual
Soft Panel and Demonstration Software
Software drivers
Tutorial presentation
2) One printed User’s Guide (this guide).
3) One printed programming Manual.
4) One printed quick reference guide.
5) One printed function keys reference card.
6) Four screws for replacing the unit's legs, if desired.
7) One male load connector per power module, including pins and back-shell.
8) One On-Off control connector.
9) One diagram with the installed modules location and modules' addresses.
10) One warranty document.
In addition, the following accessories can be ordered:
1) User’s guide (P.N.: TM-XMUG)
2) Programming manual (P.N.: TM-XMPM)
3) Output load connector (P.N.: XMP LCON) (including back shell and
pins)
4) Extension 1.2 meter net cable for connecting slave expansion mainframe
(P.N.: XMP NET CBL)
5) GPIB cable, 1 meter (P.N.: XMP GPIB CBL)
2 XMP 2600 User’s Guide rev. 1.0