Options key – AASTRA 6739i User Guide EN User Manual
Page 110
Options Key
104
41-001317-05 REV01 – 06.2013
Configuring an XML Softkey
Use the following procedures to configure an XML key on your phone.
IP Phone UI
1.
Press
on the phone to enter the Options List.
2.
Press the <Softkeys> key. By default, all of the softkeys that display are configured as “None”.
3.
Press a <None> key A softkey configuration screen displays.
4.
In the “Type” field, press the <None> key. A screen displays with softkey keys.
5.
Press the <XML> function key to apply to the softkey.
6.
In the "Label" field, enter a label to apply to this softkey.
7.
In the “Value” field, specify the XML application URI to apply to this softkey.
Note:
Contact your System Administrator for the appropriate value(s) to enter in the “Value” field.
8.
Press <Save> to save the softkey. The softkey applies to your phone immediately and displays on your idle screen.
9.
Press the
to return to the previous menu or press the
to return to the idle screen.
Aastra Web UI
Note:
A ring group must be configured on the Sylantro Server in order for a GCP softkey to function.
1.
Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module.
Softkeys
2.
Select from “Key 1” through “Key 55”.
3.
In the "Type" field, select "XML".
4.
In the "Label" field, enter a label to apply to this key.
5.
In the "Value" field, enter a URI(s) to apply to this key.
Note:
Contact your System Administrator for the appropriate value(s) to enter in the "Value" field
6.
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
7.
Select an expansion module key.
8.
In the "Type" field, select "XML".
9.
In the "Label" field, enter a label to apply to this key.
10.
In the "Value" field, enter a URI(s) to apply to this key.
Note:
Contact your System Administrator for the appropriate value(s) to enter in the "Value" field.
11.
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
12.
Click Save Settings.