Using handsfree speakerphone, Using a headset, Making calls – AASTRA 6739i User Guide EN User Manual
Page 140
Making Calls
134
41-001317-05 REV01 – 06.2013
Using Handsfree Speakerphone
The handsfree feature allows you to speak to someone without using the handset or headset. Your phone must be in
either the Speaker or Speaker/Headset audio mode. For more information about setting the audio mode on your phone,
see
•
To dial using handsfree, first press
and enter a number at the dial tone.
•
To answer a call on your phone using handsfree, press
or the line/call appearance key.
•
If you are in Speaker audio mode, lift the handset and press
to switch between handsfree and handset.
•
If you are in Speaker/headset audio mode, press
to switch between handsfree and headset.
•
When the handset is on hook, press
to disconnect the call.
When handsfree is on, the speaker light turns on.
Using a Headset
The 6739i accepts headsets through the modular RJ22 jack on the back of the phone. You can adjust the volume of your
headset if desired. You can also make and receive calls using your headset.
Reference
For more information about setting a headset device mode and adjusting the headset volume, see
To make and receive calls using a headset:
IP Phone UI
Note:
Contact your telephone equipment retailer or distributor to purchase a compatible headset. Customers should read
and observe all safety recommendations contained in headset operating guides when using any headset.
IP Phone UI
1.
Ensure that you have selected a headset audio mode by accessing the Options list (under option Options-
>Audio->Audio Mode on the IP Phone).
2.
Plug the headset into the jack.
3.
Press the
key to obtain a dial tone or to answer an incoming call. Depending on the audio mode selected
from the options menu, a dial tone or an incoming call is received on either the headset or the handsfree speak-
erphone.
4.
Press the
key to end the call.