AASTRA 6739i User Guide EN - Manual (Page 89)

Options Key
41-001317-05 REV01 – 06.2013
83
The following Aastra Web UI screen shows the states you can configure for your phone.
The following table describes the states available to configure for the softkeys.
The following table identifies the applicable default states for each softkey type on the IP phone
State Description
idle The phone is not being used.
connected The current line is in an active call (or the call is on hold).
incoming The phone is ringing.
outgoing The user is dialing a number, or the far-end is ringing.
busy The current line is busy because the line is in use or the line is set as “Do Not Disturb”.
Key Function Description
None All states disabled.
Line idle, connected, incoming, outgoing, busy
Speed Dial idle, connected, incoming, outgoing, busy
Do Not Disturb idle, connected, incoming, outgoing, busy
Busy Lamp Field (BLF) connected
BLF/List connected
Auto Call Distribution (ACD) idle
Directed Call Pickup (DCP)/
Group Call Pickup (GCP) idle, connected, incoming, outgoing, busy
XML connected
Flash All states disabled
Sprecode connected
Park connected
Pickup idle, outgoing
Last Call Return idle, connected, incoming, outgoing, busy
Call Forward idle, connected, incoming, outgoing, busy
BLF/Xfer connected
Speeddial/Xfer idle, connected, incoming, outgoing, busy
Configurable Softkey States