AASTRA 6739i User Guide EN - Manual (Page 185)

Additional Features
41-001317-05 REV01 – 06.2013
179
Configuring Incoming Intercom Settings
Use the following procedure to configure incoming intercom call settings on the IP phone.
Using Redial Key for “Last Number Redial”
The IP phone has an enhanced redial user interface that allows a user to quickly redial the last number that was dialed out
from the phone. You can:
Aastra Web UI
1. Click on Basic Settings->Preferences->Incoming Intercom Settings.
2. The "Auto-Answer" field is enabled by default. The automatic answering feature is turned on for the IP phone
for answering Intercom calls. To disable this field, uncheck the box.
Note:
If the Auto-Answer field is not checked (disabled), the phone treats the incoming intercom call as a normal call.
3. The "Microphone Mute" field is enabled by default. The microphone is muted on the IP phone for Intercom calls
made by the originating caller. To disable this field, uncheck the box.
4. The "Play Warning Tone" field is enabled by default. If “Auto-Answer” is enabled, the phone plays a warning
tone when it receives in incoming intercom call. To disable this field, uncheck the box.
5. The "Allow Barge In" field is enabled by default. If “Allow Barge In” is enabled, the phone puts an active call on
hold and answers the incoming Intercom call. To disable this field, uncheck the box.
6. Click Save Settings.
• Press the Key once, scroll the list of numbers, then press the Key again to dial the number
that displays on the screen. The “last number redial” feature for the Redial key is static and is not configurable.