AASTRA 6739i User Guide EN - Manual (Page 151)

Handling Calls
41-001317-05 REV01 – 06.2013
145
In the default pre-dial mode, users are able to edit the destination number prior to dialing, whereas in live dial mode they
are not able to, however the “Dial” and “Cancel” softkeys are provided while the user inputs the number.
Using Local Conferencing in Pre-Dial Mode
Use the following procedure to create a conference call using local conferencing in pre-dial mode.
Using Local Conferencing in Live Dial Mode
Use the following procedure to create a conference call using local conferencing in live dial mode.
IP Phone UI
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
speakerphone key. A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
4. Press the key or . You will not hear a dial tone before the dialing begins.
5. Enter the phone number of Party 3.
Note:
Users are able to edit the destination number (“Backspace” softkey is provided and navigation key is functional to
move the cursor to the desired location).
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the conference.
7. Press the key or the again to add Party 3 to the conference. Party 1 (which is yourself ), Party
2, and Party 3 are all connected to a single conference.
8. To drop a party from the conference, use the navigation key to select the party and press the key.
Note:
You can view the numbers and names (if available) of the parties in the conference call on the screen. When a name
is displayed, pressing
drops the displayed party from the call.
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
speakerphone key. A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
4. Press the key or You should hear a dial tone before dialing begins.
5. Enter the phone number of Party 3.
Note:
Users are not able to edit the destination number as the phone will either match the inputted number to a dial plan
or wait for the set digit timeout.
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the conference.
7. Press the key or again to add Party 3 to the conference. Party 1 (which is yourself ), Party 2, and
Party 3 are all connected to a single conference.
8. To drop a party from the conference, use the navigation key to select the party and press the key.
Note:
You can view the numbers and names (if available) of the parties in the conference call on the screen. When a name
is displayed, pressing
drops the displayed party from the call.
Conf
Conf
Conf
Conf