AASTRA 6739i User Guide EN - Manual (Page 90)

Options Key
84
41-001317-05 REV01 – 06.2013
Key Display Behaviour
On the 6739i IP Phone, you can configure 55 softkeys with specific functions. If you have no softkeys configured on the IP
Phone, and you assign softkey functions to higher number keys in the Aastra Web UI, the key functions automatically
appear in the first available position on the LCD display.
For example, if softkey 1 is set to BLF/Xfer and softkeys 2 through 11 are set to "None" and you configure softkey 12 as
the following:
Type: speed dial
Label: LAB
Value: 3456
after saving the settings, the "LAB" label actually appears in position 2 of the LCD.
A softkey function of "None" does not display on the idle screen at all.
The following illustrations show the configuration of Key 12 and how that key displays on the phone.
Speeddial/Conf idle, connected, incoming, outgoing, busy
Intercom idle, connected, incoming, outgoing, busy
Phone Lock All states disabled.
Paging All states disabled.
Empty idle, connected, incoming, outgoing, busy
Note:
Softkey states can only be enabled/disabled using the Aastra Web UI. The states for each softkey display enabled
by default. To disable a state, you uncheck the box.
Key Function Description
Key 12 configured as a speed dial