AASTRA 6739i User Guide EN - Manual (Page 95)

Options Key
41-001317-05 REV01 – 06.2013
89
Configuring a Speed Dial on a Softkey/Expansion Module Key (using the press-and-hold feature) Using the IP Phone UI
Use the following procedure to configure a speed dial key on a softkey or expansion module key.
IP Phone UI
1. Press an unprogrammed softkey or expansion module key.
The following screen displays.
Note:
You can press the "Cancel" key at anytime during the speed dial programming to cancel and not save the speed
dial information.
2. In the “Line” field, press the or to select a line to assign to the speed dial key.
Valid values are 1 through 9.
This is the line that the phone opens to dial the number after you press the speed dial key. By default, the phone
uses Line 1.
3. Press the “Name” field. A keyboard displays.
Enter a name for the speed dial key using the displayed keyboard.
4. Press the “Number” field.
Enter a number for the speed dial key using the displayed keyboard.
5. Press <Save> to save the speed dial key. The following is an example of the screen that displays.
6. Press the to return to the previous menu or press the to return to the idle screen.
12 : 45pm
Mon Jan 1
Type
Line 1
Cancel Save
Number
Speed Dial Edit:
Spddial Name
12 : 45pm
Mon Jan 1
OK
Speed Dial Edit:
Entry Saved: 5554343