Printronix PrintNet Enterprise - Manual (Page 14)

14
Chapter 1 Printer Setup
P5000 Series Line Matrix Printers
1. On the operator panel, press the ON LINE CLEAR key to take the printer
offline.
2. Press UP and DOWN at the same time to unlock the ENTER key.
3. Press PREV , NEXT , UP , and DOWN at the same time to enter the
Factory menu.
4. Press NEXT until PRINTER MGMT displays.
5. Press DOWN until DIAGNOSTIC PORT displays.
6. Press DOWN again to see the current selection.
7. Press NEXT until Debug Ethernet or Debug Adapter displays.
8. Press ENTER to select it.
9. Press UP and DOWN at the same time to lock the ENTER key.
10. Press ON LINE CLEAR to put the printer back online.
SL5000r/T5000r Series Thermal Printers
1. On the operator panel, press the PAUSE key to take the printer offline.
2. Press to place the printer in Menu mode. QUICK SETUP displays on
the operator panel.
3. Press ↓ and ↵
at the same time to unlock the
↵
key.
4. Press + until PRINTER MGMT displays.
5. Press ↓ until PNE Port displays.
NOTE: If PNE Port does not display, see “Factory Menu” below.
6. If you have the internal PCI NIC, press + until Ethernet displays. If you
have the external NIC, press + until Adapter displays.
7. Press
↵
to select it.
8. Press
↓ and ↵
at the same time to lock the
↵
key.
9. Press PAUSE twice to put the printer back online.
Factory Menu
1. On the operator panel, press the PAUSE key to take the printer offline.
2. Press ↓ and ↵
at the same time to unlock the
↵
key.
3. Press + , – ,
↓, and ↑ at the same time to enter the Factory menu.
4. Press
↓ until PNE Port (or Diagnostic Port) displays.
5. If you have the internal PCI NIC, press + until Ethernet (or Debug
Ethernet) displays. If you have the external NIC, press + until Adapter (or
Debug Adapter) displays.
6. Press
↵
to select it.
7. Press
↓ and ↵
at the same time to lock the
↵
key.
8. Press PAUSE twice to put the printer back online.
..
.