Printronix PrintNet Enterprise - Manual (Page 220)

220
Chapter 6 Event To Action Mapping
Figure 193. Setting Action Parameters
Events
Table 9 lists the available events and the related parameters. Events
parameters are available for the Input Opto-Couplers, Panel Key Pressed
events, Printer Error and Warning events (including RFID and ODV related
errors), and PAA events (related to Data fields and Timers).
Table 9: Events And Parameters
Event Name Description Parameters
Security Key
Required
Input Opto-Coupler Events generated by the GPIO input
Opto-Couplers. Opto-Coupler
Number (1..8),
Active, Inactive
Status Events
Printer Powered Up Events generated by the printer when
the printer is powered on and ready to
print. None
Printer Online Event generated by the printer when
the printer goes online. None
Printer Offline Event generated by the printer when
the printer goes offline. None
Printer Paused Event generated by the printer when
the printer enters Pause mode. None
Power Save Mode
Entered Event generated by the printer when
the printer enters Power Save Mode. None
Power Save Mode
Exited Event generated by the printer when
the printer exits Power Save Mode. None