Macro settings tab – Printronix PrintNet Enterprise User Manual
Page 33
Preferences
33
Macro Settings Tab
Figure 14. Preferences: Macro Settings Tab – General Sub-Tab
The Macro Settings tab has three sub-tabs: General, Network, and Serial.
See Figure 14.
General Sub-Tab
Macro Config File:
Displays the macro file that will load automatically when
you start the macro utility. To select a new default macro config file, type it into
the Macro Config File field, or click
Browse
to locate a file on your network.
Printer Port:
Allows you to select the port that data is sent through. The
choices vary according to the host computer. Possible choices include LPT1,
LPT2, COM1, COM2, and Network.
If you select COM1 or COM2, click the
Serial
tab to further define printer
parameters. If you select Network, click the
Network
tab to further define the
network parameters.
•
Use selected network printer:
Check this box to send data directly to
the network printer selected in the printer database. You do not need to
further define network parameters.
•
Rescan:
Checks to see which ports are currently available on the host
computer.