Printronix PrintNet Enterprise - Manual (Page 141)

Kerberos Tab
141
Figure 120. Wireless Properties:
Kerberos Tab – KDC Sub-Tab
KDC Sub-Tab
You must click Read to obtain the printer’s settings before you can modify
them.
NOTE: If the NIC has a password assigned to the user guest , then a Telnet
guest password is required. See “Security Tab” on page 63.
KDC Port: The TCP/UDP port number used by the KDC. The default is 88.
KDC Name: The name of the KDC which the Access Point is registered. The
default is krbtgt.
KDC Realm: The realm of the KDC which the Access Point is registered. The
default is LOCALREALM .
Clock Skew/Units: The maximum allowable time difference between the
Print Server clock and the KDC clock, in seconds, hours, or days. The default
is 300 seconds.
Ticket Lifetime/Units: The maximum allowable ticket lifetime in seconds,
hours, or days. The range is 300 seconds to 3 days. The default is 10 hours.
When you are finished, click Send to transmit the values to the printer.
NOTE: If the NIC has a password assigned to the user root , then a Telnet
root password is required. See “Security Tab” on page 63.
If you are not going to modify settings on any other tabs, you must update the
printer for the settings to take effect. Click
Update to update the printer.
IMPORTANT Make sure the settings match those configured in the Access Point.