Printronix PrintNet Enterprise - Manual (Page 229)

Actions
229
• Timer Expired
This event happens when a user defined timer expires or when a user
defined time is reached. See “Timers” on page 254.
• Table Entered
This event happens when a new mapping table is entered. The event can
be used to execute actions regarding new tables. For example, when you
want to check the content of a datafield and no other events are available.
• Table Exited
This event generates before going to a new table. This event can also be
used to execute last minute actions. For instance, if we want to go from
table 1 to either table 2 or 3 and if a variable needs to be initialized, we
could use the table exited event. This way we only have to specify the
initial value once.
• UCP Data In
This event generates when the data received on the Universal Control
Port (UCP) matches the data defined with the parameters of this event.
This event requires that the UCP port be enabled; a warning dialog will be
shown if this option is not enabled. This message displays only once for
each GPF editing session.
NOTE: The events Datafield Changed, Timer Expired, Table Entered, and
Table Exited, and UPC Data In are only functional with the advanced
GPIO features enabled in the printer.
Actions
The Action field allows you to specify which action should be linked (or
mapped) to the selected event. Table 10 lists all possible actions and related
parameters.
Table 10. Event Actions and Parameters
Action Name Description Parameters
Security Key
Required
Output Opto-Coupler Action that applies to the output
Opto-Couplers. State, Pulse, Repeated
Pulse, Number (1..8),
Pulse Duration (ms)
Output Relay Action that applies to the output
relays. Action, State, Pulse,
Repeated Pulse,
Number (1..4)
Printer Status
Printer Online Action switches the printer to
online mode. None
Printer Offline Action switches the printer to
offline mode. None