Printronix PrintNet Enterprise - Manual (Page 86)

86
Chapter 3 Factory Settings Differences
Differences Only View
In the Differences Only View mode, only the differences between the Factory
configuration and other menu configurations are listed. The differing values
are highlighted in yellow. The menus are not highlighted.
Figure 67. Differences Only View
Displayed Language
The Displayed Language drop-down menu shows all available foreign
languages that the attached printer supports. Since this depends on the
printer, the drop-down menu will be disabled when the Factory Settings
Differences application is first launched. After the Upload Differences program
is executed, the available language names supported by the printer will
display.
After you select a language, the program determines if it has already been
uploaded, and changes the table settings to this language. If it is not loaded,
the program uploads the selected language and redisplays the table settings
in the new language.