Printronix PrintNet Enterprise - Manual (Page 71)

71
3
Applications and
Web Access
Configuration Editor
Figure 55. Configuration Editor Window
To access the Configuration Editor application, select a printer from the
printer database and select
Applications Configuration Editor or click the
(configuration editor) button. Select File Upload From Printer to upload
configurations from the printer. The configurations upload from the printer and
the active configuration displays in the Configuration Editor window. See
Figure 55.
The Configuration Editor supports offline editing, allowing the editing of stored
configurations. If you start the Configuration Editor without connecting to a
printer, the screen will be blank (indicating no configuration loaded). A
configuration will not display until you load a configuration file from a disk or
computer.
The Configuration Editor allows you to upload, modify, and download eight
user-defined configurations and the factory default configuration (only if
modification of the factory configuration has been enabled; see the NOTE on
page 73). You may also save sets of configurations to your local hard drive so
that they can be easily downloaded to the printer at any time.
The Configuration Editor does not change the current configuration or the
active printer status until the configurations are downloaded to the printer.