Printronix PrintNet Enterprise - Manual (Page 235)

Actions
235
• Move Paper
This action allows the movement of paper either to the next top-of-form
(the gap) or, if required for specific applicator functions, a specified
distance forward or backward. See Figure 200.
Figure 200. Setting Move Paper Action Parameters
• Cut Once
Cuts the media in the current position.
• Flush Next Label
This action removes a single form (the one that is ready to be printed)
from the queue in the printer. It can be used in Secure Printing
configurations where two printers are interconnected through GPIO and
one printer is ready to take over printing if the first printer develops a
problem.
• Single Label Printing, Enable
This action prints one label at a time.
• Single Label Printing, Disable
This action disables single page printing.
• RFID: Program Next Label
This action is specifically designed for RFID Print and Apply applications
where the programming of the RFID tag in the label does not have to
occur simultaneously with the printing of the actual text on the label.