Printronix PrintNet Enterprise User Manual
Page 52
52
Chapter
2
The Menu Bar
Next, click
Add
to define a new task (see Figure 34). In the new task item,
specify the following information, then click
Apply
or
OK
.
Email Address:
Enter the e-mail address where you want PNE to
send the alert messages.
Device:
To choose a device item you want PNE to monitor, such as a
folder, specific printer, or a range of IP addresses.
First:
To set the beginning IP address in a polling range. Use this
option if you select
Range:
as the Device option.
Last:
To set the last IP address in a polling range. Use this option if
you select
Range:
as the Device option.
NOTE:
In the remaining alert option fields, select
enable
or
disable
as
desired.
Offline
,
Warning
,
Media Input
,
Media Output
,
Media Path
,
Marker
,
Cutter
,
Barcode
,
RFID, Scanner
,
Label
,
Intervention Needed
,
Consumables
, and
Power Cart:
For a description of the alert groups
and printer events, refer to “Alert Groups” in the SNMP Configuration
section of chapter three in the
Network Interface Card User’s Manual
.
All options are enabled by default.
Comment:
Enter comments as needed.
Figure 35. Status Monitoring Properties:
Alert Delivery Tab – Syslog Posting Sub-Tab