Printronix PrintNet Enterprise - Manual (Page 55)

The Status Menu
55
• For line matrix printers, the printer was powered on with a fault
condition (not allowing the ribbon to be activated), so PNE cannot
determine the amount of ribbon remaining
• For line matrix printers, the amount of ribbon remaining has reached 0%
(you can still print depending on the operator panel settings)
NOTE: The following three icons appear only if the features are installed.
The (signal strength) icon indicates the strength of the radio signal.
• Green with three or four bars indicates a strong signal
• Yellow with two bars indicates a moderate signal
• Red with one bar indicates a weak or non-existent signal
The (ethernet port) icon always remains blue, since it represents an
ethernet connection.
The (battery power) icon indicates the percentage of available battery
power.
• Green indicates the battery has 61% to 100% available power
• Yellow indicates the battery has 20% to 60% available power
• Red indicates the battery has less than 20% available power
Place the pointer over the , , or icon to obtain status information
about the feature. See Figure 37, Figure 38, and Figure 39 on page 55.
NOTE: No information displays if you place the pointer over the icon.
The status information provided by PrintNet Enterprise varies based
on the printer mode and/or the printer connection method. All USB
connected printers will not have its status updated. To see the current
printer status, use the virtual front panel. For T2N printer models, only
basic status information will be available: Online or Offline.
Figure 37. The Ribbon Supply Icon