Printronix PrintNet Enterprise - Manual (Page 76)

76
Chapter 3 Configuration Editor
Saving Configuration Files
Normally, your printer can save only nine configurations in its memory. You
change these configurations through the operator panel. However, using
PNE, you can store a nearly unlimited number of configurations on your host
computer.
Once you have made your changes, you can save your configurations as a
.cfg file on your local hard drive. This way, you can open any set of
configurations from your host computer and download them into your printer
quickly and easily.
To save configurations to your local hard drive, select File Save As . Be sure
to save your configuration as a .cfg file.
It may be necessary to save a configuration file in the format used by previous
versions of PNE. In this case, select “Legacy Configuration File” from the
Files of Type: list and select the file to be saved.
Figure 60. Saving as a Legacy Configuration File