Printronix PrintNet Enterprise User Manual
Page 53
The Status Menu
53
3.
Syslog Posting:
Used in a UNIX operating system, it allows PNE to log
alerts to a file located in the PNE installation directory. To log alerts,
check the
Enable Syslog
check box, then click
Add
(see Figure 35). A
task item adds to the log list. In the task item, specify the following as
applicable, then click
Apply
or
OK
.
Machine Address:
The UNIX IP Address.
Port:
See your system administrator.
Device:
To choose a device item that you want PNE to monitor, such
as a folder, specific printer, or a range of IP addresses.
First:
To set the beginning IP address in a polling range. Use this
option if you select
Range:
as the Device option.
Last:
To set the last IP address in a polling range. Use this option if
you select
Range:
as the Device option.
NOTE:
In the remaining alert option fields, select
enable
or
disable
as
desired.
Offline
,
Warning
,
Media Input
,
Media Output
,
Media Path
,
Marker
,
Cutter
,
Barcode
,
RFID, Scanner
,
Label
,
Intervention Needed
,
Consumables
, and
Power Cart:
For a description of the alert groups
and printer events, refer to “Alert Groups” in the SNMP Configuration
section of chapter three in the
Network Interface Card User’s Manual
.
All options are enabled by default.
Comment:
Enter comments as needed.