Servers tab – Printronix PrintNet Enterprise User Manual
Page 31
Preferences
31
Servers Tab
Figure 12. Preferences: Servers Tab
The Servers tab allows you to assign port values for the SNMP (Simple
Network Management Protocol) Trap Server, the Web Server, and the XML
Server. Click
Service Enabled
next to the corresponding server to turn it on.
NOTE:
You must restart PNE to use the new settings and enable the servers.
SNMP Trap Server:
The service that enables PNE to receive alerts from the
printer when its status changes. Once PNE receives the alert, PNE creates an
instant status poll to reflect the change in the database pane. For instance, if
you turn the printer offline, the printer sends an alert to PNE causing it to
change the printer status instantly. In the database pane, the printer status
changes to offline.
NOTE:
The SNMP Trap Server works only if the printer’s NIC is configured
correctly using the Configure Print Servers utility. See “Configure
Print Servers” on page 153.
Web Server:
Allows you to view the active PNE using a web browser. See
NOTE:
If you want to use the Web Server service, you must also enable the
XML Server service.
XML Server:
PNE uses XML to communicate with its web server.