Printronix PrintNet Enterprise - Manual (Page 234)

234
Chapter 6 Event To Action Mapping
Figure 199. Output Relay Settings
• Printer Offline/Printer Online
These two actions switch the printer offline or online.
• On/Offline Switch
This action allows the printer to be switched offline if it is online, and to be
switched online if it is offline. The switch works as a toggle.
• Clear Buffer
A host or application controlled memory clear.
• Pause Printing
This action results in the print engine going offline with the interface to the
host still active. This allows receiving and pre-processing of host data
until the buffer is full.
• Resume Printing
If there is data in the buffer, the printer resumes printing until it is switched
offline or paused through the Pause Printing action.
• Print Next Label
This action can have different functions. If GPIO Print & Apply is enabled,
the action is Print Next RFID Label. In Single Label Printing Mode, the
action is Print Next Label. If the user switches the printer to Pause mode
without going into Single Label Printing Mode, the Print Next Label also
functions similar to the previous version of GPIO.
IMPORTANT Do not place the printer in Pause mode and select the Single Label
Printing Mode, this stops the engine and prevents the printer from
printing.
• Reprint Last Printed Label
This action reprints the last page printed.
• Form Feed
This action performs a form feed.