Printronix PrintNet Enterprise - Manual (Page 225)

Events
225
• Printer Paused
This event happens when the printer pauses because of the “pause
printer” action. The printer accepts data from the host and parses this
data until its buffers are full. No printing will take place. The print engine is
offline but the printer’s data processing unit is still online.
• Power Save Mode Entered
This event signals the moment when the printer enters Power Save
Mode.
• Power Save Mode Exited
This event signals when the printer becomes active again.
• Start Data Processing
This event signals the start of the processing of received data. This is not
the same as the Start Printing event.
• End Data Processing
This event signals the end of the data processing cycle. This is not the
same as the end printing event.
• Printer Buffers Empty
This event takes place as soon as the print buffers are emptied.
• Single Label Printing, Enabled
This event happens on the Enter Single Label Mode action. It indicates
that this mode has been entered.
• Single Label Printing Invoked
This event indicates that the Single Label Mode is terminated and that
normal, continuous printing is active.
• Label Pending
This event generates when the printer is in Local mode (i.e., the print
engine is temporarily stopped) and all incoming data has been processed.
• Started Printing
This event happens when the printer starts printing. The printer starts
printing when all data processing is done, there is actual data to print, and
the printer is no longer in local mode. The event will not happen on “paper
moves without print.”
• Label Printing
This event occurs when the label is printing.
• Ended Printing
This event indicates the end of actual printing. The paper may still be
moving as printing does not always stop at top of form.
• Started Paper Move
This event indicates the beginning of the paper motion.