Properties – Printronix PrintNet Enterprise User Manual
Page 44
44
Chapter
2
The Menu Bar
Properties
Select
Status
Properties
to open the Status Monitoring Properties dialog
box. The dialog box contains three tabs: Discovery, Polling, and Alert
Delivery.
NOTE:
To enable printer discovery, check the
Enable Printer Discovery
check box.
Figure 26. Status Monitoring Properties:
Discovery Tab – Print Server Discovery Sub-Tab
Discovery Tab
You can discover printers on a network in three ways:
1.
Print Server Discovery:
This option allows you to discover all PrintNet
®
printers on a subnet. To enable the option, check the
Enable Print
Server Discovery
check box in the Status Monitoring Properties dialog
box (see Figure 26), then click
Apply
or
OK
.
Response Wait (Seconds):
To specify the time delay (in seconds) PNE
waits for a printer response. By default, the value is set at 5 seconds.
Broadcast IP
,
Subnet Mask
, and
Return Gateway:
These settings must
match your network configuration. See your system administrator.
NOTE:
To discover unconfigured NICs, you must enter the Gateway Address
and Subnet Mask in the Return Gateway field.