4 operation, 1 switch the meter on and off, Operation – Xylem ProLab 2000 User Manual
Page 21: Switch the meter on and off, 4operation
ProLab 2000
Operation
21
ba75577e05
11/2013
4
Operation
4.1
Switch the meter on and off
Switching on
Switching off
1
Press the <On/Off> key.
The display shows the meter designation and software version.
Subsequently, the access control display appears.
2
Start anonymous access with <MENU/OK>.
The meter switches to the measuring mode.
or
Place the electronic key on the read field and leave it there for
approx. 2 seconds until the key has been recognized.
The display shows the USER ID that was read.
3
Confirm the displayed data with <MENU/OK>.
The meter switches to the measuring mode.
[i] Apply electronic key
or
Press OK (anonym. access).
Anonymous access
User
[i] Identification successfull
[i]USER ID = 9876543210
Register USER ID
USER ID:
1234567890
Erase
Output to RS232/USB
Continue
User
only with administrator login
1
Press the <On/Off> key.
The meter is switched off.