Xylem ProLab 2000 - Manual (Page 92)

Operation ProLab 2000
92 ba75577e05 11/2013
4.10.3 Options for data transmission
Via the RS232 interface, you can transmit data to a PC or external
printer. The following table shows which data is transmitted to the
interface in which way:
Note
The following rule applies: Except for the menus, the display content is
generally downloaded to the interface with <PRINT> (displayed
measured values, measurement datasets, calibration records).
Data Control Operation / description
Current
measured values
of the connected
sensor Manual  With <PRINT>.
 Simultaneously with every
manual storage process (see
page 81).
automatic, at
intervals  With <PRT
_
>. Then you
can set the transmission
interval.
 Simultaneously with every
automatic storage process
(see page 82).
Stored measured
values Manual  Displayed dataset:
with <PRINT> after recall
from data storage.
 All datasets according to the
filter criteria via the Output to
RS232/USB function.
For details, see page 84.
Calibration
records Manual
 Calibration record of a
sensor:
Calibration record of a sensor
with <PRINT> (after calling
up from the data storage or at
the end of a calibration
procedure).
 All calibration records after
calling up from the data
storage via the Output to
RS232/USB function.
For details, see page 87.
automatic  For the respective sensor at
the end of a calibration
procedure.