Xylem ProLab 2000 - Manual (Page 82)

Operation ProLab 2000
82 ba75577e05 11/2013
4.9.2 Automatic storage at intervals
The storage interval (Interval) determines the chronological interval
between automatic storage processes. Each storage process transmits
the current dataset to the interface at the same time.
Configuring the
automatic storage
function
Settings You can configure the automatic storage function with the following
settings:
1 Open the menu for automatic storage with <STO
_
>.
SAMPLE ID 1
Interval 30 s
Duration 180 min
Continue
00d03h00min 00d15h
34min
<STO_>
Menu item Possible
setting Description
SAMPLE ID 1 ... 999 Determine the sample
designation for the series
of datasets.
Interval 2, 5 s, 10 s,
30 s, 1 min,
5 min, 10 min,
15 min,
30 min, 60 min Storage interval.
The lower limit of the
storage interval can be
restricted by the number of
free storage locations.
The upper limit is restricted
by the storage duration.
Duration 1 min ... x min Storage duration.
Specifies after which time
the automatic storage
should be terminated.
The lower limit of the
storage duration is
restricted by the storage
interval.
The upper limit is restricted
by the number of free
storage locations.