Xylem ProLab 2000 - Manual (Page 34)

Operation ProLab 2000
34 ba75577e05 11/2013
4.4.3 System
Overview The following sensor-independent meter features can be adjusted in
the system menu/System and its submenus:
 Menu language
 Beep on keystroke
 Display illumination
 Display contrast
 Unit of the temperature display
 Data interface
 Clock and date function
 Function to reset all sensor-independent system settings to the
default condition
Settings In the measured value display, open the system menu with <MENU/
OK
_
>. After completing the settings, switch to the measured value
display with <MODE>.
Menu item Setting Description
System / General /
Language Deutsch
English
(further) Select the menu language
System / General /
Beep On
Off Switch on/off the beep on
keystroke
System / General /
Illumination On
Off Switch the display illumination
on/off
System / General /
Contrast 0 ... 100 % Change the display contrast
System /
Measurement /
Temperature unit °C
°F Temperature unit, degrees
Celsius or degrees Fahrenheit.
All temperatures are displayed
with the selected unit.
System /
Measurement /
Stability control Auto
Off Switch on or off the automatic
Stability control (see page 35).
System / Interface /
Baud rate 1200, 2400,
4800, 9600,
19200 Baud rate of the data interface