I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 11)

10
Coordinates and Directions Display
User can define the dome’s direction of due north, which will help to show
up the exact moving directions on screen. And zone title is supported to
display when the dome moves to the specified zone.
Auto Tracking
The dome will automatically fix and track the moving object according to the
user’s setup via OSD.
Motion Detection
The dome will detect the changes in the defined video zone and trigger alarm.
It supports to 8 video Locations, each with 4 detection zones.
Limit Stops
The dome can be programmed to move within the limit stops (left/right,
up/down).
Label Display
The on-screen label of the preset title, azimuth/elevation, zoom, time and dome
name can be displayed on the monitor. The displays of time and speed dome
name can be programmed.
3D Positioning
In the client software, use the left key of mouse to click on the desired position in
the video image and drag a rectangle area in the lower right direction, then the
dome system will move the position to the center and allow the rectangle area to
zoom in. Use the left key of mouse to drag a rectangle area in the upper left
direction to move the position to the center and allow the rectangle area to zoom
out.
Proportional Pan/Tilt
Proportional pan/tilt automatically reduces or increases the pan and tilt speeds
according to the amount of zoom. At telephoto zoom settings, the pan and tilt
speeds will be slower than at wide zoom settings. This keeps the image from
moving too fast on the live view image when there is a large amount of zoom.
Auto Focus
The auto focus enables the camera to focus automatically to maintain clear video
images.
Wide Dynamic Range (WDR)
The wide dynamic range (WDR) function helps the camera provide clear images
even under back light circumstances. When there are both very bright and very
dark areas simultaneously in the field of view, WDR balances the brightness level
of the whole image and provide clear images with details.